Skip to main content
Log in
Texas Instruments LMV324ID — Memory (DRAM / SRAM / Flash / EEPROM)

LMV324ID General Purpose Op-Amp, 1 MHz GBW

MPNLMV324ID
End of Life

Texas Instruments LMV324ID, General Purpose Amplifier, 4 Circuits, Rail-to-Rail Output, 1 MHz Gain Bandwidth, 1 V/µs Slew Rate, 2.7 V to 5.5 V Supply, 14-SOIC, -40°C to 125°C.

$1.17Ref. price · indicative, final on quote
Texas Instruments LMV324ID datasheet (PDF)
Packaging14-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LMV324ID specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1.7 mV
Voltage - supply span5.5 V
Current - supply410µA (x4 Channels)
Current - input bias15 nA
Current - output (Channel)40 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product1 MHz
PackageTube
Slew rate1V/µs
Case14-SOIC (0.154\", 3.90mm Width)
Number of circuits4

Product details

The Texas Instruments LMV324ID is a quad general-purpose operational amplifier in a 14-SOIC package. It delivers a 1 MHz gain-bandwidth product and a 1 V/µs slew rate, with rail-to-rail output swing. Supply range runs from 2.7 V to 5.5 V.

1 MHz GBW and 1 V/µs slew rate — what they mean on the bench

A 1 MHz gain-bandwidth product and 1 V/µs slew rate suit audio, sensor filtering, and low-speed data acquisition. The 410 µA total supply current across all four amplifiers makes the part suited for power-conscious signal chains.

Rail-to-rail output and 40 mA drive

The rail-to-rail output stage swings close to the supply rails. Each channel can source or sink 40 mA. The 15 nA input bias current and 1.7 mV input offset are typical for a general-purpose bipolar stage.

Frequently asked questions

Is LMV324ID rail-to-rail?

Yes, the LMV324ID has a rail-to-rail output stage, allowing the output to swing close to both supply rails.

What is the LMV324ID equivalent?

A close functional equivalent is the TLV9351IDCKR, a single-channel general-purpose op-amp with 3.5 MHz GBW, 20 V/µs slew rate, and rail-to-rail output, but it is a single-channel part in a different package. For a quad replacement, the OPA4374AIPWT is a CMOS quad op-amp with 6.5 MHz GBW and rail-to-rail output, though it draws higher supply current. Neither is a drop-in pin-for-pin replacement; verify the pinout and supply range for your board.