1 MHz GBW, 130 µA supply — the parametric envelope
The LMV321M7/NOPB: Supply current is 130 µA typical, placing it in the low-power category for battery-operated or power-budgeted designs where every microamp counts.
Output drive and input offset — what the ratings mean for the BOM
Output current capability is 160 mA per channel — unusually high for a general-purpose op-amp in a SC-70-5 package, meaning it can directly drive moderate loads such as a headphone or a small relay coil without a buffer stage. Input offset voltage is 1.7 mV typical; for a 10× gain stage this translates to 17 mV of DC error at the output, acceptable for many sensor-conditioning and signal-chain applications but worth derating if the front-end signal is below 10 mV full-scale. Input bias current is 15 nA typical — a JFET-input alternative would be lower, but for circuits with source impedances under 100 kΩ this bias current produces negligible voltage drop across the feedback network.
Industrial temperature range and package footprint
Housed in a 5-lead SC-70-5 (SOT-353) package with surface-mount termination, the footprint is approximately 2.0 mm × 2.1 mm — a space-efficient choice for multi-layer PCBs where board real estate is at a premium.
Active lifecycle and compliance documentation
ROHS3 compliant per the manufacturer's declaration, with no exemptions listed; the part is suitable for assemblies requiring EU RoHS conformance without additional documentation burden.