The LM2904PSR's 700 kHz gain-bandwidth product sets the usable frequency for closed-loop gain. This is fine for DC or low-frequency AC signals but won't track fast transients like switching regulator outputs or high-speed comparator edges.
Operates from a single 3 V rail up to 26 V, or split supplies like ±1.5 V to ±13 V. The wide span covers 5 V logic rails, 12 V industrial buses, and 24 V automotive systems without needing a separate regulator. An engine-bay sensor interface or a rooftop solar inverter controller stays within spec across the thermal extremes. Each channel draws 500 µA supply current, totaling 1 mA for both amplifiers. In a battery-powered data logger running at 1 kHz sample rate, the op-amp's quiescent draw is a manageable fraction of the system budget.
The supplier device package is 8-SO, meaning the same land pattern as a generic SO-8. Surface-mount assembly with 1.27 mm pin pitch. The 8-SOIC package is compatible with reflow soldering profiles per JEDEC J-STD-020. No exposed pad — thermal management relies on the copper trace area connected to the GND pin.