Texas Instruments LM2902BIPWR, quad general-purpose op-amp, 36-V supply, 1.2-MHz gain bandwidth, 0.5 V/µs slew rate, 14-TSSOP package, surface mount, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Push-Pull |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 600 µV |
| Voltage - supply span | 36 V |
| Current - supply | 240µA (x4 Channels) |
| Current - input bias | 10 nA |
| Current - output (Channel) | 30 mA |
| Operating temperature | -40°C~125°C(TA) |
| Gain bandwidth product | 1.2 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.5V/µs |
| Case | 14-TSSOP (0.173\", 4.40mm Width) |
| Number of circuits | 4 |
The Texas Instruments LM2902BIPWR is a quad-channel general-purpose operational amplifier rated for supply spans from 3 V to 36 V. The four amplifiers share a common supply and ground, packaged in a 14-TSSOP (4.40 mm width) for surface-mount assembly.
For a BOM freeze or a long-run production line, this part does not carry the supply-risk flag that NRND or EOL parts do.
Slew rate is 0.5 V/µs. That limits the part to signals below roughly 80 kHz full-scale swing — fine for audio, sensor outputs, and DC levels, but not for video or high-speed pulse amplification.