Texas Instruments INA154U differential amplifier, 1 circuit, 14V/µs slew rate, 3.1 MHz -3dB bandwidth, 8 V to 36 V supply, 8-SOIC package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | Differential |
| Voltage - input offset | 100 µV |
| Voltage - supply span | 36 V |
| Current - supply | 2.4mA |
| Current - output (Channel) | 60 mA |
| Operating temperature | -40°C ~ 85°C |
| -3db bandwidth | 3.1 MHz |
| Package | Tube |
| Slew rate | 14V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 1 |
It has a 14V/µs slew rate and 3.1 MHz -3dB bandwidth.
It can drive 60 mA output current.
Surface-mount 8-SOIC (3.90 mm body width) — standard footprint, no surprises for reflow or hand-solder rework. ROHS3 compliant, so it passes into EU and California-restriction builds without an exemption note.
The INA154U has a slew rate of 14V/µs.
It is a differential amplifier for applications requiring common-mode rejection — precision current sensing, bridge sensor amplification, and differential line receivers in industrial or instrumentation signal chains.
No direct pin-compatible second-source is listed. For a general-purpose single op-amp with similar bandwidth, the TLV9351IDCKR offers 3.5 MHz and 20 V/µs but lacks the differential topology — it is a functional alternative only if common-mode rejection is not critical.