Texas Instruments HDC2010 humidity and temperature sensor, 2% RH accuracy, I²C output, 1.62 V supply, -40°C to 85°C, surface mount, Tape & Reel.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Operating temperature high | -40°C to 85°C |
| Humidity max | 0 to 100% RH |
| Output signal | 11b |
| Sensor_type | Humidity, Temperature |
| Accuracy | 2.0 |
| Package_type | Tape & Reel (TR); Cut Tape (CT) |
| Status | Active |
| Response time | 8.0 |
| Supply voltage | 1.62 |
The HDC2010YPAT: For a system that sees thermal cycling in an outdoor enclosure or a cold warehouse, the error budget stays tight without needing a per-unit calibration step. The 0 to 100% RH measurement range with an 8 ms response time means it catches condensation events fast enough for a dew-point alarm loop.
Sourced through authorized distribution channels.
The HDC2010YPAT communicates over an I²C bus. This is a standard two-wire interface that shares the bus with other I²C peripherals without needing additional GPIO pins on the host MCU.
The sensor operates from a 1.62 V supply.