Skip to main content
Log in
Texas Instruments DRV5053VAQLPG — Sensors & Transducers

DRV5053VAQLPG Hall Effect Sensor – TI, TO-92-3

MPNDRV5053VAQLPG
Active

Texas Instruments DRV5053VAQLPG, Automotive AEC-Q100, single-axis Hall effect sensor, analog voltage output, ±9 mT sensing range, 20 kHz bandwidth, TO-92-3 package

$1.8000Ref. price · indicative, final on quote
Texas Instruments DRV5053VAQLPG datasheet (PDF)
PackagingTO-226-3, TO-92-3 Short Body
RoHSROHS3 Compliant
SeriesAutomotive, AEC-Q100
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DRV5053VAQLPG specifications
ParameterValue
SeriesAutomotive, AEC-Q100
Output typeAnalog Voltage
MountingThrough Hole
Voltage2.5V ~ 38V
Output current2.3mA
Current - supply3.6mA
Operating temperature-40°C~125°C(TA)
Bandwidth20kHz
AxisSingle
PackageBulk
FeaturesTemperature Compensated
TechnologyHall Effect
Sensing distance±9mT
CaseTO-226-3, TO-92-3 Short Body

Product details

Single-axis Hall sensor with 20 kHz bandwidth and ±9 mT range

The DRV5053VAQLPG is a single-axis Hall effect sensor from Texas Instruments' Automotive AEC-Q100 series, delivering an analog voltage output proportional to the applied magnetic flux density. Its ±9 mT sensing range and 20 kHz bandwidth suit applications such as brushless-DC motor rotor position sensing, linear position detection, and current sensing with a ferrite core. The wide supply range of 2.5 V to 38 V lets it run directly from a 5 V or 12 V rail without a separate regulator, simplifying the BOM.

Automotive temperature grade and supply flexibility

The 2.5 V to 38 V supply range covers common automotive and industrial rails; the sensor draws a maximum of 3.6 mA, keeping the thermal budget low even in dense PCB layouts.

Active production, TO-92-3 package, ROHS3 compliant

It is supplied in a TO-92-3 through-hole package (short-body variant), suitable for breadboard prototyping, sensor probes, and retrofit designs where the PCB is already laid out for a three-pin Hall sensor.

Frequently asked questions

Is DRV5053VAQLPG pin compatible with DRV5053AQLPG?

Both share the same base product number DRV5053 and the same TO-92-3 package outline, so they are pin-compatible. The difference is the sensitivity grade — the VAQLPG variant has a different mV/mT transfer characteristic than the AQLPG. Confirm the sensitivity needed for your magnetic circuit before substituting.

What is the bandwidth of DRV5053VAQLPG?

The bandwidth is 20 kHz. This is sufficient for motor commutation at moderate speeds and for vibration monitoring up to several kHz. For higher-speed rotor position sensing, consider a device with a wider bandwidth.

What is the closest pin-compatible alternative in the same family?

Within the DRV5053 family, the DRV5053AQLPG is pin-compatible and shares the same package and supply range. The sensitivity differs, so compare the mV/mT values in the datasheet to match your target output swing.