Skip to main content
Texas Instruments DRV10963JMDSNT — Analog & Data Acquisition
Texas Instruments

TI DRV10963JMDSNT BLDC Motor Driver, 500 mA, 10-SON

MPNDRV10963JMDSNT
End of Life

Texas Instruments DRV10963JMDSNT, fully integrated BLDC motor driver with control and power stage, 500 mA output, 2.1 V to 5.5 V supply, PWM interface, 10-UFDFN exposed pad package, -40°C to 125°C.

$1.78Ref. price · indicative, final on quote
DRV10963JMDSNT datasheet
Packaging10-UFDFN Exposed Pad
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

DRV10963JMDSNT Technical Specifications
ParameterValue
Mounting typeSurface Mount
Motor type - AC, DCBrushless DC (BLDC)
Voltage - load2.1V ~ 5.5V
Voltage2.1V ~ 5.5V
Current - output500mA
InterfacePWM
Operating temperature-40°C ~ 125°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
FunctionDriver - Fully Integrated, Control and Power Stage
TechnologyPower MOSFET
ApplicationsFan Motor Driver
Case10-UFDFN Exposed Pad
Output configurationHalf Bridge (3)

Product details

500 mA, 2.1 V to 5.5 V BLDC fan driver — what it buys the design

The DRV10963JMDSNT is a fully integrated BLDC motor driver with control logic and three half-bridge power MOSFETs. It delivers up to 500 mA from a 2.1 V to 5.5 V supply and load range, and uses a PWM interface for speed control.

Three half-bridges, one PWM input — no firmware overhead

The internal commutation logic handles the six-step sequence; the host only needs to send a PWM duty cycle on the input pin. The 500 mA current rating is the total output capability across all three phases.

Package and thermal: 10-UFDFN with exposed pad

The 10-SON (3x3 mm) package has an exposed thermal pad on the bottom. In a fan-driver layout that pad is the primary heat path — a via-stitched ground plane under the pad keeps the junction below the 125°C maximum at full load. The part is surface mount only, which suits automated assembly, but the small pad makes hand rework tricky without a hot-air station.

Frequently asked questions

What is the output current and voltage range of DRV10963JMDSNT?

The DRV10963JMDSNT delivers up to 500 mA continuous output. Both the supply voltage and the motor load voltage share the same 2.1 V to 5.5 V range, so a single 3.3 V or 5 V rail powers both the logic and the motor.

Does DRV10963JMDSNT have a direct replacement if it goes EOL?

No official direct replacement or drop-in second source is listed by TI for the DRV10963JMDSNT. The DRV8811PWPR is a different part class — a stepper motor driver with higher voltage and current — and is not pin-compatible. If the part goes EOL, the supply would shift to the surplus and broker channel.