Skip to main content
Texas Instruments CD4010BM96 — Logic ICs
Texas Instruments

CD4010BM96 Buffer Non-Inverting 16-SOIC, 3V-18V Supply

MPNCD4010BM96
End of Life

Texas Instruments 4000B series CD4010BM96, Buffer Non-Inverting, 6 elements, 1 bit per element, Push-Pull output, 3V to 18V supply, 16-SOIC, -55°C to 125°C.

$0.56Ref. price · indicative, final on quote
CD4010BM96 datasheet
Packaging16-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

CD4010BM96 Technical Specifications
ParameterValue
Series4000B
Logic typeBuffer, Non-Inverting
Output typePush-Pull
Mounting typeSurface Mount
Voltage3V ~ 18V
Current - output high, low3mA, 36mA
Operating temperature-55°C ~ 125°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
Case16-SOIC (0.154\", 3.90mm Width)
Number of elements6
Number of bits per element1

Product details

What the 3V–18V supply range means for your BOM

The CD4010BM96 is a hex non-inverting buffer from TI's 4000B series. Its 3V to 18V supply range lets it interface directly with legacy ±15V analog rails, 12V industrial buses, or 5V TTL logic without a level translator. The push-pull output delivers 3mA source and 36mA sink, enough to drive a modest relay coil or LED indicator through a resistor. Six independent buffers per package keeps the BOM count low for simple fan-out or line-receiver tasks in mixed-voltage systems.

The 4000B series is known for wide noise margin at high supply voltages, which helps in electrically noisy industrial environments.

Frequently asked questions

Can CD4010BM96 replace CD4050?

Both are hex non-inverting buffers from the 4000B family with the same pinout and supply range. The CD4050 has higher output drive (8mA source, 48mA sink typical), while the CD4010BM96 is rated 3mA source, 36mA sink. For most logic-level fan-out or line-receiver tasks the CD4010BM96 is a drop-in replacement, but check the output current requirement against your load.

Is CD4010BM96 compatible with 5V logic?

Yes. With a supply of 5V, the input thresholds are compatible with standard 5V CMOS and TTL logic families. The wide 3V to 18V supply range means it can also serve as a level translator between 3.3V and 5V domains when the supply is set to the higher rail.