Texas Instruments BQ24060DRCT, Li-Ion/Polymer battery charger, single cell, 1A max charge current, 16.5V max supply, programmable timer, fault protection, -40 to 85°C, 10-VSON (3x3) package, Surface Mount, ROHS3 compliant.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Battery pack voltage | 4.2V |
| Voltage | 16.5V |
| Current - charging | Constant - Programmable |
| Charge current - max | 1A |
| Operating temperature | -40°C~85°C(TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | 10-VFDFN Exposed Pad |
| Number of cells | 1 |
| Fault protection | Over Temperature, Over Voltage, Short Circuit |
| Battery chemistry | Lithium Ion/Polymer |
| Programmable features | Timer |
The BQ24060DRCT integrates over-temperature, over-voltage, and short-circuit protection, which simplifies the bill of materials by eliminating external comparators or supervisory ICs. The programmable timer is the only user-configurable feature — set the charge-termination timeout with a single external capacitor. No I2C or digital interface is needed, which keeps firmware overhead at zero.
It supports single-cell Lithium Ion and Lithium Polymer batteries, with a regulated charge voltage of 4.2V.
The maximum programmable charge current is 1A. The charge current is constant-current programmable via an external resistor.
No pin-compatible equivalent is listed in the available records. The BQ24060 family shares the same base number (BQ24060) and footprint, but density variants and feature sets differ — verify the specific order code against your BOM requirements before substitution.
It is supplied in Tape & Reel or Cut Tape, with a 10-VFDFN Exposed Pad package (10-VSON, 3x3 mm) for surface-mount assembly. The exposed pad requires a thermal land pattern on the PCB for heat sinking.