Skip to main content
Log in
Texas Instruments BQ24045DSQR — Power Management (PMIC / Gate Driver)

BQ24045DSQR Li-Ion Battery Charger IC, 1A Max, 28V Input

MPNBQ24045DSQR
Active

Texas Instruments BQ24045DSQR, single-cell Li-Ion/Polymer linear battery charger IC, 1A max charge current, 28V input, 4.35V battery termination, 10-WFDFN exposed pad package, surface mount, active.

$1.7100Ref. price · indicative, final on quote
Texas Instruments BQ24045DSQR datasheet (PDF)
Packaging10-WFDFN Exposed Pad
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

BQ24045DSQR specifications
ParameterValue
MountingSurface Mount
Battery pack voltage4.35V
Voltage28V
Current - chargingConstant - Programmable
Charge current - max1A
Operating temperature0°C~125°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
Case10-WFDFN Exposed Pad
Number of cells1
Fault protectionOver Temperature, Over Voltage, Short Circuit
Battery chemistryLithium Ion/Polymer
Programmable featuresCurrent

Product details

Single-cell Li-Ion charger with 1A programmable current

The Texas Instruments BQ24045DSQR is a linear battery charger IC for single-cell Lithium Ion or Polymer packs, with programmable charge current up to 1A and maximum input voltage of 28V.

What the 1A charge current and 28V input mean for your BOM

The 1A maximum charge current sets the charge rate for a given battery capacity. The 28V input tolerance lets the charger run directly from unregulated wall adapters or 24V industrial rails without a front-end regulator.

Programming charge current — one resistor, no digital bus

Charge current is set by a single resistor from the ISET pin to ground — no I2C, no digital interface. The BQ24045DSQR offers current as its only programmable feature.

Frequently asked questions

What is the BQ24045DSQR charge current range?

The charge current is programmable up to a maximum of 1A. The actual range depends on the external resistor value selected; the part supports constant-current charging with a programmable set point.

Is BQ24045DSQR compatible with 4.2V Li-Ion batteries?

The BQ24045DSQR terminates at 4.35V, which is above the 4.2V standard for conventional Li-ion cells. For a 4.2V battery, consider the BQ24040 or another charger with a 4.2V termination voltage, or verify that the 4.35V termination is acceptable for your specific cell — some newer cells are rated for 4.35V, but standard 4.2V cells may be overcharged.

What is the difference between BQ24045DSQR and BQ24040?

The primary difference is the battery termination voltage: the BQ24045DSQR terminates at 4.35V for high-voltage Li-ion cells, while the BQ24040 terminates at 4.2V for standard cells. Both are single-cell linear chargers with programmable current up to 1A and similar fault protection. The BQ24040 is the drop-in equivalent if your design requires 4.2V termination.

How to program charge current on BQ24045DSQR?

Connect a resistor from the ISET pin to ground. The resistor value sets the constant-current charge level; the relationship is defined in the datasheet. No digital programming is needed — the BQ24045DSQR has no I2C or SMBus interface.