NXP TJA1043T/1J automotive CAN transceiver, half-duplex, 5 Mbps, 4.5V-5.5V supply, AEC-Q100, -40°C to 150°C, 14-SOIC.
| Parameter / Attribute | Specification / Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 4.5V ~ 5.5V |
| Protocol | CANbus |
| Operating temperature | -40°C ~ 150°C |
| Grade | Automotive |
| Duplex | Half |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Data rate | 5Mbps |
| Qualification | AEC-Q100 |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 120 mV |
| Number of drivers (Receivers) | 1/1 |
Factory lead times blocking production? We lock verified brand-new original stock in Shenzhen within 2 hours.
Direct access to Shenzhen floor inventory, franchised allocation buffers, and factory bonded stock to resolve line-down shutdowns.
Standard factory-sealed packaging compliant with EIA-481 standards for automated high-speed SMT pick-and-place lines.
High-resolution photos of original reel labels, 2D DataMatrix, and pin coplanarity sent via WhatsApp/Telegram before you release wire payment.
The 5 Mbps data rate supports CAN FD operation. The 120 mV receiver hysteresis cleans up the differential signal on a noisy automotive bus.
The TJA1043T/1J carries an Active lifecycle status. ROHS3 compliant, so it clears the current EU material restrictions.
Yes. The transceiver runs on a 4.5V to 5.5V supply and its logic interface is 5V-tolerant, so it mates directly with 5V CAN controllers or MCUs.
No. The lifecycle status is Active. No end-of-life notice or last-time-buy date is recorded for this order code.
The silicon is identical. The /1J suffix indicates tape-and-reel packaging (Cut Tape / Tape & Reel) for automated pick-and-place. The base TJA1043T typically ships in tubes.