NXP S08 8-bit MCU, MC9S08DZ128MLL, 40MHz, 128KB Flash, 8K x 8 RAM, 2K x 8 EEPROM, CAN, LIN, SPI, I²C, 24-ch 12-bit ADC, 100-LQFP, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Series | S08 |
| Mounting | Surface Mount |
| Oscillator type | External |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 2.7V ~ 5.5V |
| Operating temperature | -40°C ~ 125°C (TA) |
| Speed | 40MHz |
| Package | Tray |
| RAM size | 8K x 8 |
| Core size | 8-Bit |
| EEPROM size | 2K x 8 |
| Peripherals | LVD, POR, PWM, WDT |
| Connectivity | CANbus, I²C, LINbus, SCI, SPI |
| Number of i (O) | 87 |
| Core processor | S08 |
| Case | 100-LQFP |
| Data converters | A/D 24x12b |
| Program memory size | 128KB (128K x 8) |
It runs at 40 MHz and packs 128 KB of Flash program memory, 8K x 8 of RAM, and 2K x 8 of EEPROM on-chip.
The 100-LQFP package is a standard surface-mount footprint; the 14x14 mm body fits on a two-layer board with reasonable fanout for the 87 I/O.
No last-time-buy or NRND notice is in effect.
No, the MC9S08DZ128MLL is listed as Active with ROHS3 compliance. No discontinuation notice is in effect.
There is no official replacement announced. Within the S08 family, the MC9S08DZ60 is pin-compatible but has 60 KB Flash instead of 128 KB — verify program memory fit before substituting.
The core runs at 40 MHz maximum.
The part comes in a 100-LQFP package (14x14 mm) with 87 I/O lines. The pinout is standard for the S08 DZ family; refer to the datasheet for the full pin assignment.
Yes, the MC9S08DZ60 is pin-compatible and shares the same peripheral set (CAN, LIN, SPI, I²C, ADC). The main difference is program memory: 128 KB on the DZ128 versus 60 KB on the DZ60. Check firmware size before using the DZ60 as a drop-in.