NXP BFU730LXZ NPN RF transistor, 53 GHz fT, 15.8 dB gain, 0.75 dB noise figure at 6 GHz, 3 V Vceo, 30 mA Ic, 160 mW max power, 3-XFDFN package, surface mount, ROHS3 compliant.
| Parameter | Value |
|---|---|
| Mounting type | Surface Mount |
| FET type | NPN |
| Voltage - collector emitter breakdown | 3V |
| Current - collector (Ic) | 30mA |
| DC current gain (hFE) (Min) @ ic, vce | 205 @ 2mA, 3V |
| Power - max | 160mW |
| Frequency | 53GHz |
| Gain | 15.8dB |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | 3-XFDFN |
| Noise figure (dB typ @ f) | 0.75dB @ 6GHz |
The 3-pin DFN1006C-3 package is a leadless, side-wettable plastic package. It requires a fine-pitch solder paste stencil and a well-controlled reflow profile.
ROHS3 compliant. For new designs, the active status means no LTB risk in the near term, but given the small package, verify availability with your preferred distributor before committing the BOM line.
Yes. With a 53 GHz transition frequency, 15.8 dB gain, and a 0.75 dB noise figure at 6 GHz, the BFU730LXZ is well suited as a low-noise amplifier or driver stage in 5 GHz WiFi (802.11a/n/ac/ax) receivers and transmitters. The 3 V Vceo and 30 mA Ic max are consistent with the bias levels used in those front-end designs.
Yes, the BFU730LXZ is ROHS3 compliant per the manufacturer's listing.