Microchip MCP2562-H/P CANbus Transceiver, Half-Duplex, 1/1 Drivers/Receivers, 4.5V~5.5V Supply, -40°C~150°C, 8-PDIP (0.300", 7.62mm), Tube.
| Parameter / Attribute | Specification / Value |
|---|---|
| Type | Transceiver |
| Mounting | Through Hole |
| Supply voltage | 4.5V ~ 5.5V |
| Protocol | CANbus |
| Operating temperature | -40°C ~ 150°C |
| Duplex | Half |
| Package | Tube |
| Case | 8-DIP (0.300\", 7.62mm) |
| Number of drivers (Receivers) | 1/1 |
Factory lead times blocking production? We lock verified brand-new original stock in Shenzhen within 2 hours.
Direct access to Shenzhen floor inventory, franchised allocation buffers, and factory bonded stock to resolve line-down shutdowns.
Standard factory-sealed packaging compliant with EIA-481 standards for automated high-speed SMT pick-and-place lines.
High-resolution photos of original reel labels, 2D DataMatrix, and pin coplanarity sent via WhatsApp/Telegram before you release wire payment.
The Microchip MCP2562-H/P is a half-duplex CAN transceiver for the physical-layer interface between a CAN protocol controller and the differential bus.
The 5V supply is standard for legacy 5V CAN controllers and for designs where the bus common-mode range benefits from the higher rail.
For a production BOM line, this means no immediate LTB risk and continued factory support.
The difference is the temperature grade. Both are active, same pinout, same supply range, same half-duplex CAN transceiver function. Choose the H variant when the junction temperature exceeds 125°C in your application.
No. It does not have a separate VIO pin for 3.3V logic levels. If your CAN controller operates at 3.3V, you will need a level translator or a 3.3V-tolerant CAN transceiver.