The TPME337K010S0035: The 330 µF capacitance at 10 V rated voltage is a common bulk value for 3.3 V or 5 V supply rails — the 10 V rating gives a 2× derating margin on a 5 V rail, which is standard practice for tantalum capacitors to avoid inrush failure. The 35 mOhm ESR is the key figure for ripple current handling: at a given ripple current, the self-heating is I² × ESR, so lower ESR means the cap runs cooler and lasts longer in a switching regulator output filter. The ±10% tolerance on 330 µF means the actual capacitance can range from 297 µF to 363 µF — the downstream regulator's loop stability must hold across that spread.
The 2917 (7343 Metric) case measures 7.30 mm × 4.30 mm with a seated height of 4.30 mm — a standard footprint that matches the common tantalum D-size and E-size pad layouts; the 0.169-inch height clears most low-profile enclosures. Molded construction means the epoxy case is square and flat — it picks and places reliably on a standard SMT line and is less prone to tombstoning than conformally coated parts.
Supplied in Tape & Reel — standard for automated pick-and-place.