Skip to main content
KYOCERA AVX TPMD337K004R0035 — Specialty Capacitors

TPMD337K004R0035 – KYOCERA AVX 330 µF 4 V Tantalum

MPNTPMD337K004R0035
Active

KYOCERA AVX TPM series, molded tantalum capacitor, 330 µF, 4 V, ±10% tolerance, 35 mOhm ESR, 2917 (7343 Metric) package, -55°C to 125°C.

$2.7594Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPMD337K004R0035 specifications
ParameterValue
TypeMolded
SeriesTPM
MountingSurface Mount
ESR35mOhm
Voltage - rated4 V
Operating temperature-55°C ~ 125°C
Size (Dimension)0.287\" L x 0.169\" W (7.30mm x 4.30mm)
Height - seated0.122\" (3.10mm)
PackageTape & Reel (TR)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance330 µF
Case2917 (7343 Metric)
Manufacturer size codeD

Product details

The 35 mOhm ESR keeps ripple voltage low on switching-regulator outputs — for a 1 A step load at 500 kHz, the ripple contribution from ESR alone is roughly 35 mV, well within the tolerance of most 3.3 V logic supplies.

In an avionics power supply that sees -40°C cold-soak and +105°C internal ambient, the part stays within its rated envelope without voltage derating beyond the standard 50 % for tantalum at elevated temperatures.

2917 molded case — board-fit dimensions

The 2917 (7343 Metric) molded case measures 7.30 mm x 4.30 mm with a seated height of 3.10 mm max. The D-size code matches the standard footprint for high-capacitance tantalum chips in this package family, so it drops onto existing 2917 pads without a layout change.

Frequently asked questions

Can I replace TPMD337K004R0035 with a standard tantalum capacitor of the same capacitance and voltage?

A standard tantalum capacitor with 330 µF and 4 V rating would have similar bulk capacitance, but the 35 mOhm ESR is lower than many commodity tantalums (often 100–300 mOhm). If your circuit relies on the low ESR for ripple attenuation or transient response, a standard part may not be a drop-in replacement. Check the ESR spec in your application before substituting.