Intel MAX® II CPLD, EPM570GT100C4N, 570 logic elements, 440 macrocells, 76 I/O, 5.4 ns tpd, 1.71V–1.89V core, 0°C to 85°C, 100-TQFP tray.
| Parameter | Value |
|---|---|
| Series | MAX® II |
| Mounting | Surface Mount |
| Programmable type | In System Programmable |
| Voltage supply - internal | 1.71V ~ 1.89V |
| Operating temperature | 0°C ~ 85°C (TJ) |
| Package | Tray |
| Manufacturer | Intel |
| Number of i (O) | 76 |
| Case | 100-TQFP |
| Number of macrocells | 440 |
| Delay time tpd(1) max | 5.4 ns |
| Number of logic elements (Blocks) | 570 |
That is commercial / industrial floor — fine for office equipment, factory controllers inside a cabinet, or telecom indoor gear. Not for under-hood or outdoor pole-mount without a heated enclosure.
100-TQFP, 14x14 mm body, surface mount. The fine pitch needs a reflow oven or hot-air station — not a field-swap part for a parking-lot repair. If you are planning a board rework, pre-bake the replacement tray part and use a stencil for the paste; hand-soldering a TQFP-100 is possible but slow.
This part is sourced and quoted to order through independent distribution. Submit an RFQ for current pricing and availability — stock levels and lead time are confirmed at quote time.
Pricing is confirmed at quote time based on volume and current market conditions. Request a quote for your target quantity.
The EPM570GT100C5N is a different speed grade variant within the same base product number. The C4N offers a 5.4 ns tpd; the C5N is a slower grade. Pinout and footprint are identical, but the timing closure differs. Verify the speed requirement before substituting.
No direct replacement or second-source part is listed in the official record. The MAX II family is still active, so the EPM570GT100C4N itself is the current production part. Older MAX 7000 series parts (like EPM7128BFC256-7) are not pin-compatible and use a different architecture.