Skip to main content
Log in
Analog Devices 5962-8770602GA — Analog & Data Acquisition

5962-8770602GA JFET Op-Amp, 28 MHz, 50 V/µs, TO-99-8

MPN5962-8770602GA
End of Life

J-FET op-amp, single circuit, 28 MHz gain bandwidth, 50 V/µs slew rate, 400 µV input offset, 4.6 mA supply, -55°C to 125°C, TO-99-8 metal can, through hole.

$12.67Ref. price · indicative, final on quote
Analog Devices 5962-8770602GA datasheet (PDF)
PackagingTO-99-8 Metal Can
RoHSRoHS non-compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5962-8770602GA specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset400 µV
Voltage - supply span44 V
Current - supply4.6mA
Current - input bias30 pA
Operating temperature-55°C ~ 125°C
Gain bandwidth product28 MHz
PackageBulk
Slew rate50V/µs
CaseTO-99-8 Metal Can
Number of circuits1

Product details

28 MHz GBW, 50 V/µs slew rate — JFET input in a hermetic can

The 5962-8770602GA is a single-channel JFET-input operational amplifier from the 5962-87706 series, packaged in a hermetic TO-99-8 metal can.

Hermetic TO-99-8 — built for sealed, high-reliability deployments

The TO-99-8 metal can package is a through-hole, hermetically sealed enclosure. It is designed for environments where moisture, outgassing, or mechanical shock would compromise a plastic package — avionics, satellite payloads, missile guidance, and downhole instrumentation. The metal can also provides a degree of RF shielding.

For a military-temperature, hermetic JFET op-amp, this is a stable sourcing position — no urgency to stockpile or qualify a substitute.

Frequently asked questions

Can 5962-8770602GA be used as a replacement for LM741?

The 5962-8770602GA is a JFET-input op-amp with a 28 MHz gain-bandwidth and 50 V/µs slew rate, while the LM741 is a general-purpose bipolar op-amp with a 1 MHz GBW and 0.5 V/µs slew rate. The 5962-8770602GA is much faster and has a far lower input bias current (30 pA vs 80 nA typical for the 741). It is not a direct pin-for-pin replacement — the TO-99-8 pinout differs from the 741's DIP-8 — but it can functionally replace a 741 in a high-speed or high-impedance circuit if the board layout and supply voltage (44 V max) are compatible.

What is the slew rate of 5962-8770602GA?

The slew rate is 50 V/µs. This large-signal bandwidth supports fast pulse amplification and high-frequency signal chains without slew-induced distortion.