Skip to main content
Log in
Analog Devices 5962-8770601PA — Analog & Data Acquisition

5962-8770601PA JFET Op-Amp, 60 V/µs Slew Rate, 30 MHz

MPN5962-8770601PA
End of Life

JFET op-amp, single circuit, 30 MHz gain bandwidth, 60 V/µs slew rate, 200 µV input offset, 15 pA bias current, 4.6 mA supply, 44 V max supply span, -55°C to 125°C, 8-CDIP (0.300", 7.62mm) / 8-CERDIP, through hole, bulk.

$45.58Ref. price · indicative, final on quote
Analog Devices 5962-8770601PA datasheet (PDF)
Packaging8-CDIP (0.300", 7.62mm)
RoHSRoHS non-compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

5962-8770601PA specifications
ParameterValue
MountingThrough Hole
Amplifier typeJ-FET
Voltage - input offset200 µV
Voltage - supply span44 V
Current - supply4.6mA
Current - input bias15 pA
Operating temperature-55°C ~ 125°C
Gain bandwidth product30 MHz
PackageBulk
Slew rate60V/µs
Case8-CDIP (0.300\", 7.62mm)
Number of circuits1

Product details

What this JFET op-amp brings to the board

The 5962-8770601PA: 30 MHz gain-bandwidth product, 60 V/µs slew rate, 200 µV input offset, 15 pA bias current, 4.6 mA supply, 44 V max supply span.

60 V/µs slew rate supports fast pulse amplifiers and video drivers. 30 MHz gain-bandwidth product supports closed-loop gains past a few MHz.

No last-time-buy window to manage, no forced redesign for a drop-in replacement.

Package and mounting — ceramic DIP, through-hole, bulk

The 8-CDIP (0.300", 7.62mm) package is the standard 8-pin ceramic DIP, with the supplier device package listed as 8-CERDIP. Mounting is through-hole, and the shipping form is Bulk. The ceramic body is hermetic — no moisture sensitivity level concerns, no bake-out before reflow if you hand-solder or wave-solder it. The 0.300" width fits standard DIP sockets, which makes field replacement straightforward: if this part is in a socketed module, you can swap it on site with basic tools.

Frequently asked questions

What are the exact specifications of the 5962-8770601PA, like slew rate and gain bandwidth?

This is a single JFET op-amp with a 30 MHz gain-bandwidth product, 60 V/µs slew rate, 200 µV typical input offset voltage, 15 pA input bias current, 4.6 mA supply current, and a maximum supply span of 44 V. It operates from -55°C to 125°C and comes in an 8-CERDIP through-hole package.

Is the 5962-8770601PA RoHS compliant?

The ceramic DIP package typically uses tin-lead solder finish. If your assembly requires RoHS compliance, you will need to evaluate a lead-free alternative or apply an exemption.