Texas Instruments AM26S10PCB, Bus Transceiver/Driver, 4-Bit, Inverting Logic, Open-Drain Output, 4.75V-5.25V Supply, 0°C-70°C, 16-DIP Through-Hole Package.
| Parameter / Attribute | Specification / Value |
|---|---|
| Logic type | Transceiver, Inverting |
| Output type | Open Drain |
| Mounting | Through Hole |
| Supply voltage | 4.75V ~ 5.25V |
| Current - output high, low | 1mA, 20mA |
| Operating temperature | 0°C ~ 70°C |
| Package | Bulk |
| Case | 16-DIP |
| Number of elements | 1 |
| Number of bits per element | 4 |
Factory lead times blocking production? We lock verified brand-new original stock in Shenzhen within 2 hours.
Direct access to Shenzhen floor inventory, franchised allocation buffers, and factory bonded stock to resolve line-down shutdowns.
Standard factory-sealed packaging compliant with EIA-481 standards for automated high-speed SMT pick-and-place lines.
High-resolution photos of original reel labels, 2D DataMatrix, and pin coplanarity sent via WhatsApp/Telegram before you release wire payment.
Open-drain outputs sink 20 mA per line; high-level output source is 1 mA. External pull-up resistor required for high state.
Pin 1 identified by notch or dot on the DIP body. Standard 16-pin DIP orientation: pin 1 top-left when notch faces left.
The AM26S10PCB is a 4-bit bus transceiver in a 16-pin DIP package. Pin 1 is identified by the notch or dot on the package. The exact pin assignments follow the standard AM26S10 family pattern, but the full pinout should be verified from the manufacturer's datasheet. The evidence does not list the individual pin numbers for A, B, G, Vcc, and GND.
The AM26S10PCB is a 4-bit bus transceiver with inverting logic and open-drain outputs. It operates from a 4.75V to 5.25V supply voltage and is specified over the 0°C to 70°C temperature range. It is used for bidirectional data transfer on TTL-level buses where open-drain outputs enable wired-OR connections.