Skip to main content
Toshiba Semiconductor TCR2LF10,LM(CT — Discrete Semiconductors
Toshiba Semiconductor

Toshiba TCR2LF10,LM(CT LDO Regulator, 1V Fixed, 200mA

MPNTCR2LF10,LM(CT
End of Life

Toshiba TCR2LF series LDO regulator, positive fixed output 1V, 200mA, SC-74A SOT-753 package, Tape & Reel or Cut Tape.

$0.38Ref. price · indicative, final on quote
TCR2LF10,LM(CT datasheet
PackagingSC-74A, SOT-753
StockIn Stock (23)
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TCR2LF10,LM(CT Technical Specifications
ParameterValue
SeriesTCR2LF
Output typeFixed
Mounting typeSurface Mount
Voltage - input5.5V
Voltage dropout1.4V @ 150mA
Voltage - output (Min (Fixed))1V
Current - output200mA
Current - quiescent2 µA
Operating temperature-40°C ~ 85°C (TJ)
PackageTape & Reel (TR); Cut Tape (CT)
CaseSC-74A, SOT-753
Control featuresEnable
Protection featuresOver Current
Number of regulators1
Output configurationPositive

Product details

1V fixed output at 200mA — the quiescent current is the story

The Toshiba TCR2LF10,LM(CT is a single-output positive LDO that delivers a fixed 1V rail at up to 200mA from a maximum 5.5V input. Its 2 µA quiescent current (Iq) means the regulator's own draw is negligible in battery-powered or always-on circuits — a sensor node pulling 1 µA in sleep mode sees the LDO's Iq as the dominant load, so the 2 µA figure sets the floor for standby power budgeting.

Package, control, and protection for board integration

Housed in the SC-74A / SOT-753 package (supplier device package SMV), this is a five-pin surface-mount footprint that shares its land pattern with many small-signal regulators — the enable pin (active-high) lets the system processor gate the output rail, and the over-current protection folds back the output when the load exceeds the 200mA rating.