Skip to main content
Toshiba Semiconductor TC7SB67CFU,LF(CT — Discrete Semiconductors
Toshiba Semiconductor

Toshiba TC7SB67CFU,LF(CT SPST-NO Switch, 12 Ohm, 5-SSOP

MPNTC7SB67CFU,LF(CT
End of Life

Toshiba TC7SB67CFU,LF(CT analog switch, SPST-NO, 1 circuit, 12 Ohm on-resistance, 1.65 V to 5.5 V supply, 4 ns / 4.5 ns switching, -40°C to 85°C, 5-TSSOP / SC-70-5 / SOT-353 package, Tape & Reel and Cut Tape.

$0.36Ref. price · indicative, final on quote
TC7SB67CFU,LF(CT datasheet
Packaging5-TSSOP, SC-70-5, SOT-353
StockIn Stock (27)
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

TC7SB67CFU,LF(CT Technical Specifications
ParameterValue
Mounting typeSurface Mount
Voltage - supply, single (V+)1.65V ~ 5.5V
Current - leakage (IS(off))1µA
Operating temperature-40°C ~ 85°C
PackageTape & Reel (TR); Cut Tape (CT)
Case5-TSSOP, SC-70-5, SOT-353
Switch circuitSPST - NO
Number of circuits1
On-State resistance12Ohm
Switch time (Ton, toff)4ns, 4.5ns
Multiplexer (Demultiplexer circuit)1:1
Channel capacitance (CS(off), CD(off))5pF

Product details

12 Ohm on-resistance and 4 ns switching — signal-path fit

The TC7SB67CFU,LF(CT: The 4 ns turn-on and 4.5 ns turn-off times mean the switch can pass digital edges up to roughly 100 MHz before propagation delay distorts the waveform; the 5 pF channel capacitance limits off-state isolation to about -30 dB at that frequency. The 1 µA max leakage current is negligible for source impedances below 100 kΩ; won't shift the DC bias in a precision divider or a high-impedance sensor front-end.

Industrial temperature grade in a 5-pin SC-70 footprint

The 5-pin SC-70 / SOT-353 body measures 2.0 x 2.1 mm with 0.65 mm pitch; the footprint is shared with the TC7SB66CFU,LF(CT normally-closed variant, so a PCB can accommodate either with a BOM change only. Surface-mount assembly with Tape & Reel or Cut Tape packaging — the reel quantity is standard for the SC-70 family; the Cut Tape option suits prototype or low-volume builds without committing to a full reel.

Frequently asked questions

What is the closest functional second-source to TC7SB67CFU,LF(CT?

The TC7SB66CFU,LF(CT is the normally-closed (NC) sibling in the same package, same supply range, same switching speed. The only difference is the switch logic: the TC7SB67 is SPST-NO (open when control is low), the TC7SB66 is SPST-NC (closed when control is low). The footprint is identical — a BOM swap requires no PCB change, only a logic inversion in the firmware or gate driving the control pin.

Will TC7SB67CFU,LF(CT drop into a board designed for TC7SB66CFU,LF(CT without rewiring?

Yes, the two parts share the same 5-pin SC-70 / SOT-353 footprint and pinout. The only difference is the switch state when the control pin is low — the TC7SB67 is normally-open, the TC7SB66 is normally-closed. The board layout does not change; the control logic must invert the drive signal to get the same function.