Skip to main content
Toshiba Semiconductor RN2115,LXHF(CT — Discrete Semiconductors
Toshiba Semiconductor

RN2115,LXHF(CT Toshiba PNP Pre-Biased, 50V 100mA

MPNRN2115,LXHF(CT
End of Life

Toshiba Semiconductor RN2115 series PNP pre-biased transistor, SC-75 SOT-416 package, 50 V collector-emitter breakdown, 100 mA collector current, AEC-Q101 automotive grade.

$0.33Ref. price · indicative, final on quote
RN2115,LXHF(CT datasheet
PackagingSC-75, SOT-416
StockIn Stock (26)
Lead timeIn Stock wk
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

RN2115,LXHF(CT Technical Specifications
ParameterValue
Mounting typeSurface Mount
FET typePNP - Pre-Biased
Voltage - collector emitter breakdown50 V
Current - collector (Ic)100 mA
Current - collector cutoff500nA
DC current gain (hFE) (Min) @ ic, vce50 @ 10mA, 5V
Power - max100 mW
Frequency200 MHz
GradeAutomotive
PackageTape & Reel (TR); Cut Tape (CT)
QualificationAEC-Q101
CaseSC-75, SOT-416
Resistor - base (R1)2.2 kOhms
Resistor - emitter base (R2)10 kOhms
Vce saturation (Max) @ ib, ic300mV @ 250µA, 5mA

Product details

Automotive-grade pre-biased PNP — the base-resistor pair defines the on-threshold

The RN2115,LXHF(CT is a PNP pre-biased transistor from Toshiba, rated for 50 V collector-emitter breakdown and 100 mA continuous collector current. The integrated bias network — 2.2 kOhms on the base leg (R1) and 10 kOhms on the emitter-base leg (R2) — sets the turn-on threshold and eliminates two external resistors from the BOM. The 100 mW power dissipation ceiling in the SC-75 package limits continuous duty, but the 200 MHz transition frequency keeps switching edges clean for low-speed solenoid and relay drivers.

Package and footprint — SC-75 SOT-416 with SSM marking

The SC-75 / SOT-416 package (Toshiba's SSM supplier device package) is a three-lead surface-mount outline roughly 1.6 x 1.6 mm with a 0.95 mm pin pitch.

The RN2115,LXHF(CT is the automotive-grade variant of the base RN2115 die; the LXHF suffix denotes the SC-75 package and automotive qualification. The closest peer, RN2115,LF(CT, shares the same electrical ratings but lacks the AEC-Q101 certification — a BOM swap requires confirming the temperature-grade requirement before committing.

Frequently asked questions

What is the difference between RN2115,LXHF(CT and RN2115,LF(CT?

Both share the same PNP pre-biased die with 50 V Vce, 100 mA Ic, 2.2 kOhm base resistor, and 10 kOhm emitter-base resistor. The LXHF variant adds AEC-Q101 automotive qualification and is packaged in SC-75 SOT-416; the LF variant is the commercial-grade version. If your BOM calls for automotive-grade parts, the LXHF is the correct fit.

What is the Vce saturation drop at rated drive?

Maximum Vce saturation is 300 mV at a base current of 250 µA and collector current of 5 mA. At the full 100 mA collector rating, the saturation voltage will be higher — the datasheet curve should be consulted for the actual drop at the operating point.