Skip to main content
Log in
Texas Instruments UCC27424DGNG4 — Power Management (PMIC / Gate Driver)

UCC27424DGNG4 Gate Driver, 4A Peak, Dual Low-Side, 8-HVSSOP

MPNUCC27424DGNG4
End of Life

Texas Instruments UCC27424DGNG4, dual low-side gate driver, 4A peak source/sink, 4V-15V supply, 20ns/15ns rise/fall, -40 to 125°C, 8-HVSSOP package.

$1.5400Ref. price · indicative, final on quote
Texas Instruments UCC27424DGNG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

UCC27424DGNG4 specifications
ParameterValue
Gate typeN-Channel, P-Channel MOSFET
Input typeNon-Inverting
Channel typeIndependent
MountingSurface Mount
Supply voltage4V ~ 15V
Logic voltage - VIL, VIH1V, 2V
Current - peak output (Source, sink)4A, 4A
Operating temperature-40°C~125°C(TA)
PackageTube
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) Exposed Pad
Number of drivers2
Driven configurationLow-Side
Rise (Fall time)20ns, 15ns

Product details

Dual 4A low-side driver for N- and P-channel MOSFETs

The independent channel architecture allows each output to be controlled separately, making it suitable for driving two discrete MOSFETs or paralleling channels for higher current.

Operating from a 4V to 15V supply, the driver covers common bias rails from 5V logic to 12V industrial supplies. Logic input thresholds are 1V (VIL) and 2V (VIH), compatible with 3.3V and 5V controllers without level shifting.

Housed in an 8-HVSSOP with exposed pad (3.00mm width), the package aids thermal dissipation when soldered to a copper plane. The surface-mount footprint suits automated assembly lines.

Frequently asked questions

Can UCC27424DGNG4 be used as a high-side driver?

No, the UCC27424DGNG4 is configured as a low-side driver. It drives the gate of a low-side MOSFET referenced to ground, not a high-side bootstrap or isolated topology.

What is the difference between UCC27424DGNG4 and UCC27423DGNG4?

The UCC27424DGNG4 has non-inverting inputs, while the UCC27423DGNG4 has inverting inputs. Both share the same 4A peak drive, supply range, and package; the input polarity is the deciding factor for the control logic interface.