Skip to main content
Log in
UCC27423D

UCC27423D Gate Driver – Texas Instruments, 4A Peak, 8-SOIC

MPNUCC27423D
Active

Texas Instruments UCC27423D, low-side gate driver, dual independent inverting channels, 4A peak source/sink, 4V-15V supply, 20ns rise / 15ns fall typical, -40°C to 125°C, 8-SOIC package, Tube.

$1.7700Ref. price · indicative, final on quote
Texas Instruments UCC27423D datasheet (PDF)
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

UCC27423D specifications
ParameterValue
Gate typeN-Channel, P-Channel MOSFET
Input typeInverting
Channel typeIndependent
MountingSurface Mount
Supply voltage4V ~ 15V
Logic voltage - VIL, VIH1V, 2V
Current - peak output (Source, sink)4A, 4A
Operating temperature-40°C~125°C(TA)
PackageTube
Case8-SOIC (0.154\", 3.90mm Width)
Number of drivers2
Driven configurationLow-Side
Rise (Fall time)20ns, 15ns

Product details

What this dual 4A driver does for your power stage

The UCC27423D is a dual low-side gate driver from Texas Instruments that delivers 4A peak source and 4A peak sink current per channel. That symmetric drive handles both N-channel and P-channel MOSFET gates with 20 ns rise and 15 ns fall typical times. Supply range is 4V to 15V, covering 5V and 12V gate drive rails common in telecom bricks, motor drives, and industrial power supplies. The independent channel architecture lets you drive two separate MOSFETs or parallel the outputs for higher peak current into a single gate.

Sizing the supply and checking logic compatibility

The 4V to 15V supply range sets the gate-drive voltage for the MOSFET — a 12V rail gives full enhancement for standard-logic-level FETs; 5V works for sub-logic-level parts but watch the Rds(on) increase.

Frequently asked questions

What is the difference between UCC27423D and UCC27424D?

The evidence for this page covers only the UCC27423D. Within the UCC27423/4 family, the suffix typically denotes the input polarity — the UCC27423D uses inverting inputs, while the UCC27424D uses non-inverting inputs. Confirm the logic polarity your controller expects before substituting.

What is the rise and fall time of UCC27423D?

Typical rise time is 20 ns and fall time is 15 ns, measured at the specified load conditions in the datasheet. These edge rates determine the switching losses and dead-time margin in your power stage.