Skip to main content
Log in
UCC27325D

UCC27325D Dual 4A Low-Side MOSFET Driver, -55°C to 150°C

MPNUCC27325D
Active

Texas Instruments UCC27325D, dual low-side MOSFET driver, 4A peak source/sink, 20ns rise/15ns fall, 4.5V to 15V supply, inverting/non-inverting inputs, -55°C to 150°C, 8-SOIC.

$1.6800Ref. price · indicative, final on quote
Texas Instruments UCC27325D datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

UCC27325D specifications
ParameterValue
Gate typeN-Channel, P-Channel MOSFET
Input typeInverting, Non-Inverting
Channel typeIndependent
MountingSurface Mount
Supply voltage4.5V ~ 15V
Logic voltage - VIL, VIH1V, 2V
Current - peak output (Source, sink)4A, 4A
Operating temperature-55°C~150°C(TJ)
PackageTube
Case8-SOIC (0.154\", 3.90mm Width)
Number of drivers2
Driven configurationLow-Side
Rise (Fall time)20ns, 15ns

Product details

Dual 4 A low-side driver for harsh environments

It drives both N-channel and P-channel MOSFETs from a single supply rail between 4.5 V and 15 V, covering 5 V logic and 12 V gate bias without a separate regulator. The 8-SOIC package keeps the board footprint small while the 20 ns rise and 15 ns fall times (typical at 4 A) support switching frequencies above 500 kHz in hard-switched converters.

What the 4 A peak current buys you

The 4 A peak source and 4 A peak sink current determine which power MOSFETs this driver can switch cleanly. A MOSFET with 60 nC total gate charge at 500 kHz switching frequency needs 30 mA average drive current — well within the 4 A peak capability, but the peak current matters for the Miller plateau region where the gate voltage stalls. The 4 A rating ensures fast voltage slew across the plateau, minimising switching losses. Independent channels with both inverting and non-inverting inputs let one IC drive a half-bridge (high-side and low-side) or two separate MOSFETs with independent control.

The same die is available in other package and reel options under the UCC27325 family.

Frequently asked questions

Is UCC27325D the same as UCC27324D?

The UCC27325D and UCC27324D are not the same part. The key difference is the input logic: the UCC27325D offers both inverting and non-inverting inputs on independent channels, while the UCC27324D has a different input configuration. Check the respective datasheets for the exact logic table — they are not drop-in replacements without a board spin.

Is UCC27325D compatible with 5V logic inputs?

Yes. The logic input thresholds are 1 V (VIL) and 2 V (VIH), so 5 V logic levels (typical VOH > 4.5 V, VOL < 0.5 V) drive the inputs directly. 3.3 V logic also works as long as the high-level output exceeds 2 V.