Skip to main content
Texas Instruments TPS72018YZUR — Discrete Semiconductors

TPS72018YZUR LDO 1.8V 350mA DSBGA, PSRR 85dB

MPNTPS72018YZUR
End of Life

Texas Instruments TPS72018YZUR linear regulator, fixed 1.8V output, 350mA, 5-DSBGA (0.96x1.33) package, PSRR 85dB ~ 50dB (10Hz ~ 1MHz), active lifecycle.

$1.08Ref. price · indicative, final on quote
Packaging6-UFBGA, DSBGA
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPS72018YZUR specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Voltage - input4.5V
Voltage dropout0.2V @ 350mA
Voltage - output (Min (Fixed))1.8V
Output current350mA
Current - supply80 µA
Current - quiescent38 µA
Operating temperature-40°C ~ 125°C (TJ)
PSRR85dB ~ 50dB (10Hz ~ 1MHz)
PackageBulk
Case6-UFBGA, DSBGA
Control featuresEnable
Protection featuresOver Current, Over Temperature, Under Voltage Lockout (UVLO)
Number of regulators1
Output configurationPositive

Product details

Fixed 1.8V rail with wideband PSRR

The TPS72018YZUR is a single-output positive LDO from Texas Instruments, delivering a fixed 1.8V output at up to 350mA. Its PSRR spans 85dB at 10Hz down to 50dB at 1MHz, meaning it attenuates low-frequency ripple from upstream switching converters and still holds 50dB rejection well into the MHz band where many LDOs roll off sharply. Maximum dropout is 0.2V at the full 350mA load, so a 2.0V input rail provides the necessary headroom. The quiescent current is 38µA typical, rising to 80µA maximum supply current — low enough for always-on or battery-powered sections where the regulator itself must not dominate the idle budget.

Package, temperature grade, and protection

Housed in a 5-DSBGA package (0.96x1.33mm) with a 6-bump UFBGA footprint, the part is suited for space-constrained portable or module designs. Built-in protection includes over-current, over-temperature, and under-voltage lockout (UVLO). An enable pin allows external on/off control, letting the system power down the LDO when the rail is not needed.

Frequently asked questions

What is the PSRR of TPS72018YZUR?

The PSRR is rated at 85dB at 10Hz, decreasing to 50dB at 1MHz. This provides strong rejection of low-frequency ripple while maintaining useful attenuation into the MHz range.

What package does TPS72018YZUR use?

It comes in a 5-DSBGA package (0.96x1.33mm) with a 6-UFBGA, DSBGA footprint. The supplier device package is 5-DSBGA.