Texas Instruments TPS60120PWPR charge pump step-up regulator, 200 mA output, fixed 3.3 V, 20-PowerTSSOP, Tape & Reel.
| Parameter | Value |
|---|---|
| Output type | Fixed |
| Mounting | Surface Mount |
| Voltage - input | 3.6V |
| Voltage - output (Min (Fixed)) | 3.3V |
| Output current | 200mA |
| Frequency | 320kHz |
| I/O channels | 1 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Function | Step-Up |
| Topology | Charge Pump |
| Case | 20-PowerTSSOP (0.173\", 4.40mm Width) |
| Output configuration | Positive |
| Synchronous rectifier | No |
The TPS60120PWPR: Rated for 200 mA continuous output, it switches at 320 kHz and does not use a synchronous rectifier — the external diode carries the forward drop, which is fine at this current and keeps the BOM simple.
No — TPS60120PWPR is a charge-pump step-up regulator with a single fixed 3.3 V output, while TPS65261RHBT is a buck converter with three adjustable outputs and synchronous rectification. The pinout and topology are completely different; a board spin would be required.