Skip to main content
Texas Instruments TPS3850G30DRCT — Power Management (PMIC / Gate Driver)

TI TPS3850G30DRCT Simple Reset/Power-On Reset, 3V Threshold

MPNTPS3850G30DRCT
Active

Texas Instruments TPS3850G30DRCT simple reset/power-on reset, active low open-drain output, 3V threshold, adjustable/selectable reset timeout, -40°C to 125°C, 10-VSON (3x3) package.

$1.6009Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS3850G30DRCT specifications
ParameterValue
TypeSimple Reset/Power-On Reset
MountingSurface Mount
Voltage - threshold3V
Number of voltages monitored1
Operating temperature-40°C~125°C(TJ)
ResetActive Low
OutputOpen Drain or Open Collector
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeoutAdjustable/Selectable
Case10-VFDFN Exposed Pad

Product details

3 V threshold supervisor for 3.3 V rails

The active-low, open-drain output asserts reset when the monitored voltage drops below threshold and releases after an adjustable/selectable timeout.

Adjustable timeout and industrial temperature range

The reset timeout is adjustable or selectable via external components, giving the designer control over power-up sequencing and brown-out recovery timing.

10-VSON package and surface-mount assembly

Housed in a 10-VFDFN exposed-pad package (10-VSON, 3x3 mm), the TPS3850G30DRCT is a surface-mount device. The 3x3 mm footprint fits tight board layouts where multiple supervisors or passives compete for space near the processor.

Frequently asked questions

Is TPS3850G30DRCT compatible with 3.3V systems?

Yes. The 3 V threshold is set to assert reset before a 3.3 V rail drops below the minimum operating voltage of typical 3.3 V logic, providing a clean reset signal during power-up and brown-out events.

What is the reset timeout range for TPS3850G30DRCT?

The reset timeout is adjustable or selectable via an external capacitor or resistor, allowing the designer to set the delay from microseconds to milliseconds depending on the power supply ramp rate and processor requirements.