Skip to main content
Log in
Texas Instruments TPS3807A30DCKT — Power Management (PMIC / Gate Driver)

TPS3807A30DCKT Multi-Voltage Supervisor, 20µs Reset, SC-70-5

MPNTPS3807A30DCKT
Active

Texas Instruments TPS3807A30DCKT, Multi-Voltage Supervisor, 2 monitored voltages, 3V fixed + adjustable threshold, Active Low Open Drain output, 20µs min reset timeout, SC-70-5, -40°C to 85°C.

$2.1434Ref. price · indicative, final on quote
Texas Instruments TPS3807A30DCKT datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS3807A30DCKT specifications
ParameterValue
TypeMulti-Voltage Supervisor
MountingSurface Mount
Voltage - threshold3V, Adj
Number of voltages monitored2
Operating temperature-40°C~85°C(TA)
ResetActive Low
OutputOpen Drain or Open Collector
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout20µs Minimum
Case5-TSSOP, SC-70-5, SOT-353

Product details

Two-rail supervisor in a 5-pin SC-70

The TPS3807A30DCKT: It asserts an active-low, open-drain reset when either rail drops below its threshold, and holds reset for a minimum of 20µs after both rails return within tolerance.

20µs reset timeout — glitch rejection window

The minimum 20µs reset timeout sets the window for supply transients that will be ignored. A glitch shorter than 20µs on the monitored rail does not trigger a reset.

The open-drain output allows the reset signal to be pulled up to a different voltage rail, which is common in mixed-voltage systems.

Frequently asked questions

What is the reset timeout of TPS3807A30DCKT?

The reset timeout has a minimum duration of 20µs. This means the reset output stays asserted for at least 20µs after all monitored voltages rise above their thresholds, providing a known power-up delay for the system processor.

Can TPS3807A30DCKT monitor two voltages?

Yes, it monitors two supply voltages. One channel has a fixed 3V threshold, and the second channel uses an adjustable threshold set by an external resistor divider. This allows monitoring of a 3.3V rail and a second rail such as 1.8V or 2.5V with the appropriate resistor values.