Texas Instruments TPS3801L30DCKRG4, Simple Reset/Power-On Reset, Active Low, Push-Pull Output, 2.64V Threshold, 120ms Min Reset Timeout, SC-70-5, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 2.64V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C~85°C(TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Tape & Reel (TR) |
| Reset timeout | 120ms Minimum |
| Case | 5-TSSOP, SC-70-5, SOT-353 |
The output is active-low, push-pull (totem pole), so it drives a reset line directly without needing an external pull-up resistor.
The SC-70-5 package (also known as SOT-353) is a compact 5-lead surface-mount package — about 2.0 mm × 2.1 mm — so it fits in tight layouts alongside the voltage rail being monitored.
For BOM planning, there is no last-time-buy risk on the horizon.
The output is push-pull (totem pole), active-low. No external pull-up resistor is needed.
The TPS3801L30DCKRG4 shares the same base product number (TPS3801) and the same threshold voltage. The suffix difference typically indicates packaging or tape-and-reel variation; verify the package code matches your board footprint before substituting.
Yes. With a 2.64V reset threshold and push-pull output, it is designed to monitor a 3.3V rail and drive a 3.3V logic reset input directly.