Texas Instruments TPS3707-25DGNRG4 Simple Reset/Power-On Reset, 2.25V threshold, 140ms minimum reset timeout, active high/active low push-pull output, 8-HVSSOP package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 2.25V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C~85°C(TA) |
| Reset | Active High/Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Tape & Reel (TR) |
| Reset timeout | 140ms Minimum |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) Exposed Pad |
It holds the reset output active for a minimum of 140 ms after the rail recovers, giving the system time to stabilize before the processor starts executing code. The reset output is configurable as either active high or active low, and the driver is a push-pull totem-pole stage — no external pull-up resistor needed. This makes it a direct fit for most MCU and DSP reset inputs without extra BOM components.
The reset timeout is a minimum of 140 ms. After the monitored voltage rises above the 2.25 V threshold, the reset output stays asserted for at least that duration before releasing.
Yes, the output is push-pull, totem pole — it can source and sink current without an external pull-up resistor. The reset polarity is configurable as either active high or active low.