2.93 V threshold — the trip point that matters
Its voltage threshold is 2.93 V, meaning it asserts a reset when the monitored voltage drops below that level and holds it low for a minimum of 140 ms after the supply recovers. That timeout window is sized for typical MCU oscillator start-up and power-rail settling — long enough to avoid a spurious release, short enough to keep the system responsive.
Push-pull output — no external pull-up needed
The output is active-low, push-pull (totem pole), so it drives the reset line high and low without requiring an external pull-up resistor. This simplifies the BOM and saves a resistor slot on the board. The output type is a direct match for the majority of processor reset inputs that expect a driven low level during power-up or brownout.
Industrial temperature range — covers the usual suspects
It is not specified for extended automotive under-hood or downhole environments where the junction temperature would push beyond 85°C.