Skip to main content
Log in
Texas Instruments TPS3613-01DGSRG4 — Power Management (PMIC / Gate Driver)

TPS3613-01DGSRG4 Battery Backup Circuit

MPNTPS3613-01DGSRG4
End of Life

Texas Instruments TPS3613-01DGSRG4 battery backup circuit supervisor, active high/active low reset, push-pull output, 60ms minimum reset timeout, adjustable/selectable threshold, -40°C to 85°C, 10-VSSOP package, surface mount, tape and reel.

Texas Instruments TPS3613-01DGSRG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS3613-01DGSRG4 specifications
ParameterValue
TypeBattery Backup Circuit
MountingSurface Mount
Voltage - thresholdAdjustable/Selectable
Number of voltages monitored1
Operating temperature-40°C~85°C(TA)
ResetActive High/Active Low
OutputPush-Pull, Totem Pole
PackageTape & Reel (TR)
Reset timeout60ms Minimum
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)

Product details

Battery backup supervisor with dual-polarity reset

The push-pull, totem-pole outputs drive directly into the enable pins of SRAM, flash, or logic without needing an external pull-up resistor.

60 ms reset timeout and industrial temperature range

The reset timeout is 60 ms minimum, which holds the system in reset long enough for the main supply and oscillator to stabilise after a brownout or power-up event.

Package and mounting details

The small footprint suits space-constrained designs on multi-layer boards where the supervisor sits near the supervised memory or microcontroller.

Frequently asked questions

Does TPS3613-01DGSRG4 support active low reset?

Yes, the TPS3613-01DGSRG4 provides both active-high and active-low reset outputs. The push-pull, totem-pole outputs drive either polarity without external components.

How does TPS3613-01DGSRG4 differ from TPS3613-00?

The TPS3613-01 variant offers an adjustable or selectable threshold, while the TPS3613-00 typically has a fixed threshold. Both share the same 10-VSSOP package, 60 ms reset timeout, and dual-polarity reset outputs. The -01 gives the designer flexibility to set the trip voltage to match the supervised rail.