Skip to main content
Log in
TPS3511DRG4

TPS3511DRG4 Multi-Voltage Supervisor, 3.3V/5V/12V

MPNTPS3511DRG4
End of Life

Texas Instruments TPS3511DRG4 multi-voltage supervisor, monitors three rails (3.3V, 5V, 12V), active-low open-drain reset, 100 ms minimum reset timeout, industrial temperature range -40°C to 85°C, 8-SOIC package.

Texas Instruments TPS3511DRG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS3511DRG4 specifications
ParameterValue
TypeMulti-Voltage Supervisor
MountingSurface Mount
Voltage - threshold3.3V, 5V, 12V
Number of voltages monitored3
Operating temperature-40°C~85°C(TA)
ResetActive Low
OutputOpen Drain or Open Collector
PackageTape & Reel (TR)
Reset timeout100ms Minimum
Case8-SOIC (0.154\", 3.90mm Width)

Product details

Three-rail supervisor for ATX and industrial supplies

The Texas Instruments TPS3511DRG4 is a multi-voltage supervisor that monitors three supply rails simultaneously — 3.3 V, 5 V, and 12 V — with a single active-low, open-drain reset output. It is designed for systems that need a clean power-up sequence across multiple voltage domains, such as ATX power supplies, server motherboards, and industrial control boards where a missed rail can cause logic latch-up.

Reset timing and output drive

Because the output is open-drain, it can be wire-ORed with other reset sources (watchdog, manual reset button) using a single pull-up resistor to the logic supply. The active-low polarity matches the reset input of most MCUs and DSPs.

Frequently asked questions

Does the TPS3511DRG4 have an active-low reset?

Yes, the reset output is active-low and open-drain, so it pulls low when any monitored rail falls below its threshold and releases (goes high-impedance) after the 100 ms timeout once all rails are valid.

What is the reset timeout for TPS3511DRG4?

The reset timeout is a minimum of 100 ms — after all three monitored rails are above threshold, the supervisor waits at least 100 ms before releasing the reset output.