Skip to main content
Log in
TPS3511D

TPS3511D Multi-Voltage Supervisor, 3.3V/5V/12V, Active Low

MPNTPS3511D
Active

Texas Instruments TPS3511D Multi-Voltage Supervisor, monitors 3.3V, 5V, 12V thresholds, active-low open-drain reset, 100ms min reset timeout, -40°C to 85°C, 8-SOIC package.

$1.1724Ref. price · indicative, final on quote
Texas Instruments TPS3511D datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS3511D specifications
ParameterValue
TypeMulti-Voltage Supervisor
MountingSurface Mount
Voltage - threshold3.3V, 5V, 12V
Number of voltages monitored3
Operating temperature-40°C~85°C(TA)
ResetActive Low
OutputOpen Drain or Open Collector
PackageTube
Reset timeout100ms Minimum
Case8-SOIC (0.154\", 3.90mm Width)

Product details

Three-rail voltage supervisor in an 8-SOIC

The Texas Instruments TPS3511D is a multi-voltage supervisor that monitors three supply rails simultaneously: 3.3 V, 5 V, and 12 V. It asserts an active-low, open-drain reset output when any monitored voltage falls below its threshold, with a minimum reset timeout of 100 ms. The open-drain output lets you wire-OR the reset signal with other supervisors or pull it up to a different logic rail, common in multi-voltage systems where the supervisor runs from a lower-voltage supply than the monitored rails.

Surface-mount assembly keeps the pick-and-place cost in line with volume production.

Frequently asked questions

What is the reset timeout for TPS3511D?

The reset timeout is a minimum of 100 ms. After all monitored voltages rise above their thresholds, the reset output remains asserted for at least 100 ms before releasing, giving the system power supplies and oscillator time to stabilise.

What voltages does the TPS3511D monitor?

It monitors three thresholds: 3.3 V, 5 V, and 12 V. These cover the most common logic, I/O, and intermediate bus rails in a typical ATX or embedded power supply.