Texas Instruments TPS3307-33DGNRG4 multi-voltage supervisor, 3 monitored voltages, thresholds 2.93V, 4.55V, Adj, active high/active low push-pull outputs, 140ms min reset timeout, 8-HVSSOP package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Multi-Voltage Supervisor |
| Mounting | Surface Mount |
| Voltage - threshold | 2.93V, 4.55V, Adj |
| Number of voltages monitored | 3 |
| Operating temperature | -40°C~85°C(TA) |
| Reset | Active High/Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Tape & Reel (TR) |
| Reset timeout | 140ms Minimum |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) Exposed Pad |
Both active-high and active-low reset outputs are available, driven by a push-pull, totem-pole stage — no external pull-up resistor needed. The reset timeout is a minimum of 140 ms, long enough to let the downstream processor finish its power-on reset sequence before the supervisor releases the reset line.
Housed in an 8-HVSSOP package (3.00 mm width, exposed pad) for surface-mount assembly.
Two fixed thresholds: 2.93 V and 4.55 V. The third channel is adjustable via an external resistor divider, allowing you to set a custom threshold for a non-standard rail.
Yes, both reset outputs are available — active high and active low — with a push-pull, totem-pole output stage that does not require an external pull-up resistor.