Skip to main content
Log in
Texas Instruments TPS3306-18DGKR — Power Management (PMIC / Gate Driver)

TPS3306-18DGKR Multi-Voltage Supervisor

MPNTPS3306-18DGKR
Active

Texas Instruments TPS3306-18DGKR multi-voltage supervisor, dual-channel, active-low open-drain output, 1.68V and 2.93V thresholds, 70ms min reset timeout, -40°C to 85°C, 8-VSSOP package.

$2.8300Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS3306-18DGKR specifications
ParameterValue
TypeMulti-Voltage Supervisor
MountingSurface Mount
Voltage - threshold1.68V, 2.93V
Number of voltages monitored2
Operating temperature-40°C~85°C(TA)
ResetActive Low
OutputOpen Drain or Open Collector
PackageTape & Reel (TR); Cut Tape (CT)
Reset timeout70ms Minimum
Case8-TSSOP, 8-MSOP (0.118\", 3.00mm Width)

Product details

The Texas Instruments TPS3306-18DGKR is a multi-voltage supervisor that monitors two independent supply rails with thresholds of 1.68V and 2.93V — a direct fit for 1.8V and 3.3V logic systems where a single supervisor must sequence or hold both rails in reset until they stabilise. The active-low, open-drain output asserts a reset when either monitored voltage drops below its threshold, and holds the reset for a minimum of 70 ms after both rails recover.

Thresholds and temperature range

The 1.68V threshold suits a nominal 1.8V rail with a 120 mV undervoltage margin; the 2.93V threshold suits a 3.3V rail with a 370 mV margin.

The 8-pin footprint is shared with the standard MSOP-8 and TSSOP-8 land pattern.

Frequently asked questions

Does TPS3306-18DGKR monitor both 1.8V and 3.3V?

Yes. The two monitored thresholds are 1.68V (for a 1.8V rail) and 2.93V (for a 3.3V rail).