Skip to main content
Texas Instruments TPS2552DRVT — Power Management (PMIC / Gate Driver)

TPS2552DRVT Power Distribution Switch, 1.5A, 100 mOhm

MPNTPS2552DRVT
Active

Texas Instruments TPS2552DRVT, high-side power distribution switch, 1.5 A max output, 100 mOhm typical Rds(on), adjustable current limiting, 6-WSON (2x2 mm) package, -40°C to 150°C junction temperature.

$1.0900Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS2552DRVT specifications
ParameterValue
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - load2.5V ~ 6.5V
Voltage - supply (Vcc (Vdd))Not Required
Output current1.5A
I/O channels1
InterfaceOn/Off
Operating temperature-40°C~150°C(TJ)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSlew Rate Controlled, Status Flag
Rds on100mOhm
Case6-WDFN Exposed Pad
Fault protectionCurrent Limiting (Adjustable), Over Temperature, UVLO
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

The TPS2552DRVT is a Texas Instruments high-side power distribution switch with a single N-channel output rated for 1.5 A continuous.

Adjustable current limit — protection without extra supervision

Fault protection includes adjustable current limiting, over-temperature shutdown, and undervoltage lockout (UVLO). The current limit is set with an external resistor, so the trip threshold can be dialled in for the specific load — useful when the downstream circuitry has a known inrush profile or a tight overcurrent budget.

The wide range also provides headroom for derating in high-current designs.

6-WSON (2x2) — footprint and thermal design

Housed in a 6-pin WSON with an exposed pad (2x2 mm body), the package is compact enough for space-constrained layouts. The 0.50 mm pitch is manageable on a two-layer board with careful fan-out.

Frequently asked questions

Does TPS2552DRVT support adjustable current limiting?

Yes, the TPS2552DRVT features adjustable current limiting via an external resistor. This allows the overcurrent trip threshold to be set for the specific load, rather than relying on a fixed internal limit.

What is the typical Rds(on) of TPS2552DRVT?

The typical on-resistance is 100 mOhm. This is the Rds(on) at nominal conditions; actual resistance increases with junction temperature per the normalised curve in the datasheet.

Is TPS2552DRVT available in tape and reel packaging?

Yes, the TPS2552DRVT is offered in Tape & Reel (TR) as well as Cut Tape (CT) options. The 6-WSON package is compatible with standard pick-and-place assembly.