Skip to main content
Log in
Texas Instruments TPS22995HQDDCRQ1 — Power Management (PMIC / Gate Driver)

TPS22995HQDDCRQ1 Automotive Load Switch – 19mOhm, 3A

MPNTPS22995HQDDCRQ1
Active

Texas Instruments TPS22995HQDDCRQ1, Automotive Grade, 5.5-V, 3-A, 19-mOhm load switch in SOT-23-THIN package, AEC-Q100 qualified.

$0.6300Ref. price · indicative, final on quote
Texas Instruments TPS22995HQDDCRQ1 datasheet (PDF)
PackagingSOT-23-6 Thin, TSOT-23-6
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TPS22995HQDDCRQ1 key specifications
ParameterValue
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - load0.8V ~ 5.5V
Voltage - supply (Vcc (Vdd))1.5V ~ 5.5V
Output current3A
I/O channels1
InterfaceOn/Off
Operating temperature-40°C ~ 125°C (TA)
GradeAutomotive
PackageTape & Reel (TR) Cut Tape (CT)

All specifications

TPS22995HQDDCRQ1 additional specifications
ParameterValue
FeaturesLoad Discharge, Slew Rate Controlled
Rds on19mOhm
QualificationAEC-Q100
CaseSOT-23-6 Thin, TSOT-23-6
Fault protectionCurrent Limiting (Fixed), Over Temperature
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

Active AEC-Q100 load switch – sourcing note

The TPS22995HQDDCRQ1: This is a single-channel, high-side N-channel MOSFET load switch with a typical on-resistance of 19mOhm, supporting a continuous output current up to 3A.

Supply range and protection

The input voltage range spans 0.8V to 5.5V on the load side, with a bias supply (Vcc/Vdd) from 1.5V to 5.5V — covering common automotive rails from 1.8V logic to 5V sensor supplies. Built-in fault protection includes fixed current limiting and over-temperature shutdown, with a slew-rate controlled turn-on to reduce inrush.

Supplied on Tape & Reel or Cut Tape; the narrow 0.95mm body height suits space-constrained ECU layouts.

Texas Instruments lists the base product number TPS22995 with no announced last-time-buy. ROHS3 compliant.

Frequently asked questions

Is the TPS22995HQDDCRQ1 AEC-Q100 qualified?

Yes, the TPS22995HQDDCRQ1 carries AEC-Q100 qualification, which is the automotive-grade reliability standard required for PPAP submission.

Does the TPS22995HQDDCRQ1 have a pin-compatible alternative in the same family?

The base product number TPS22995 covers this variant. Texas Instruments lists no direct pin-compatible second source on the same AEC-Q100 grade. Always confirm the full order code and package before substituting.