Texas Instruments TPS22969DNYR general-purpose high-side load switch, single N-channel output, 6 A max, 4.4 mOhm typical Rds(on), 2.5 V to 5.5 V load voltage, 8-WSON exposed-pad package, -40°C to 125°C junction temperature.
| Parameter | Value |
|---|---|
| Input type | Non-Inverting |
| Output type | N-Channel |
| Type | General Purpose |
| Mounting | Surface Mount |
| Voltage - load | 2.5V ~ 5.5V |
| Voltage - supply (Vcc (Vdd)) | 0.8V ~ 5.5V |
| Output current | 6A |
| I/O channels | 1 |
| Interface | On/Off |
| Operating temperature | -40°C~125°C(TJ) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Load Discharge, Slew Rate Controlled |
| Rds on | 4.4mOhm |
| Case | 8-WDFN Exposed Pad |
| Output configuration | High Side |
| Ratio - Input:Output | 1:1 |
The switch integrates slew-rate control to limit inrush current during turn-on, reducing supply droop on the upstream rail. An integrated load-discharge path pulls the output to ground when the switch is disabled, preventing floating output nodes that can cause erratic downstream logic states. The On/Off interface accepts a non-inverting control signal from a GPIO or system controller.
The evidence does not list reverse current protection as a feature. The part includes load discharge and slew-rate control.