Load switch with 34 mOhm on-resistance and integrated protection
The output is a P-Channel MOSFET, configured as a high-side switch with a 1:1 input-to-output ratio.
Fault protection set for robust power rail design
This part integrates adjustable current limiting, over-temperature protection, reverse current blocking, and short-circuit protection. The fault protection set means the switch can handle downstream shorts or overcurrent events without external clamp diodes or a separate supervisory IC — useful for power-sequencing or hot-swap stages where the load is unknown at power-up.
Temperature grade and package — industrial reach in a sub-mm footprint
The 6-DSBGA package (1.11 x 0.71 mm) demands a controlled solder-paste stencil and X-ray inspection — the 0.4 mm pitch BGA is not hand-solderable. The Load Discharge feature (active pull-down on the output when disabled) prevents floating output rails during power-down sequencing.