Skip to main content
Log in
Texas Instruments TPS2236DAP — Power Management (PMIC / Gate Driver)

TPS2236DAP ExpressCard Power Switch, 6 Outputs, 45 mOhm

MPNTPS2236DAP
Obsolete

Texas Instruments TPS2236DAP ExpressCard™ switch, 6 high-side outputs, 45 mOhm Rds(on) typ, 1.3 A per channel, 1.5 V / 3.3 V load, 32-HTSSOP exposed pad, -40°C to 85°C.

$2.4600Ref. price · indicative, final on quote
Texas Instruments TPS2236DAP datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS2236DAP specifications
ParameterValue
TypeExpressCard™ Switch
MountingSurface Mount
Voltage - load1.5V, 3.3V
Voltage - supply (Vcc (Vdd))Not Required
Output current1.3A
I/O channels6
Operating temperature-40°C~85°C(TA)
PackageTube
FeaturesPower Good, Status Flag
Rds on45mOhm
Case32-TSSOP (0.240\", 6.10mm Width) Exposed Pad
Fault protectionCurrent Limiting (Fixed), Over Temperature
Output configurationHigh Side
Ratio - Input:Output1:2

Product details

ExpressCard slot power switch — six high-side outputs

The Texas Instruments TPS2236DAP is a dedicated ExpressCard™ power-interface switch, integrating six high-side outputs with a 1:2 input-to-output ratio — meaning two input rails (1.5 V and 3.3 V) feed six switched outputs, three per voltage rail, to power up to three ExpressCard slots from a single controller. Each output is rated for a continuous 1.3 A maximum, with a typical on-resistance of 45 mOhm, keeping conduction losses low in the 3.3 V main power path.

Fault protection and status reporting

Built-in fault protection includes fixed current limiting and over-temperature shutdown, with Power Good and Status Flag outputs that signal the host controller when the output voltage is within regulation or a fault condition exists.

32-pin HTSSOP with exposed pad — thermal and layout notes

The package ships in Tube form; the base product number is TPS2236, and the DAP suffix identifies the HTSSOP variant with exposed pad.

Frequently asked questions

What is the replacement for TPS2236DAP?

No official replacement order code is listed on the lifecycle record from Texas Instruments. For a pin-compatible alternative, evaluate other ExpressCard switches in the TPS2236 family (same base product number) that may still be active, or consider a surplus purchase of the TPS2236DAP while stock lasts.

Is TPS2236DAP still available?

The part is obsolete from the manufacturer, but it is still available through independent distribution channels. Availability is confirmed per RFQ — no blanket stock-holding claim.

Can TPS2236DAP be used in a 3.3V system?

Yes — the TPS2236DAP is designed for ExpressCard slots that use a 3.3 V main power rail and a 1.5 V auxiliary rail. The load voltage inputs are rated for 1.5 V and 3.3 V, and the switch outputs are configured accordingly.