Texas Instruments TPS2115ADRBTG4 source selector switch, N-channel FET, 2:1 input:output ratio, 2 A max output, 2.8 V to 5.5 V supply, 55 µA supply current, 8-VDFN exposed pad package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Type | Source Selector Switch |
| FET type | N-Channel |
| Mounting | Surface Mount |
| Supply voltage | 2.8V ~ 5.5V |
| Current - supply | 55 µA |
| Output current | 2A |
| Operating temperature | -40°C~85°C |
| Package | Tape & Reel (TR) |
| Applications | Handheld/Mobile Devices |
| Case | 8-VDFN Exposed Pad |
| Delay time - ON | 1 ms |
| Delay time - OFF | 5 ms |
| Internal switch | Yes |
| Ratio - Input:Output | 2:1 |
The Texas Instruments TPS2115ADRBTG4 is a 2:1 source selector switch that routes one of two input power rails to a single output, using an internal N-channel FET with a 2 A continuous output ceiling.
Turn-on delay is 1 ms and turn-off delay is 5 ms, which sets the minimum hold-up time for the downstream regulator when switching between supplies.
The TPS2115 and TPS2114 are both 2:1 source selectors, but the TPS2115 integrates an N-channel FET rated for 2 A continuous output, while the TPS2114 uses a lower-current internal switch. The TPS2115 is the higher-current option for loads above 1 A.