Skip to main content
Log in
Texas Instruments TPS2113PWG4 — Power Management (PMIC / Gate Driver)

TPS2113PWG4 Source Selector Switch, 2.8V–5.5V, 1.25A

MPNTPS2113PWG4
End of Life

Texas Instruments TPS2113PWG4, Source Selector Switch, N-Channel, 2.8V~5.5V supply, 1.25A output, 55 µA supply current, 1 ms ON delay, 5 ms OFF delay, -40°C~85°C, 8-TSSOP package.

$57.3300Ref. price · indicative, final on quote
Texas Instruments TPS2113PWG4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TPS2113PWG4 specifications
ParameterValue
TypeSource Selector Switch
FET typeN-Channel
MountingSurface Mount
Supply voltage2.8V ~ 5.5V
Current - supply55 µA
Output current1.25A
Operating temperature-40°C~85°C
PackageTube
ApplicationsHandheld/Mobile Devices
Case8-TSSOP (0.173\", 4.40mm Width)
Delay time - ON1 ms
Delay time - OFF5 ms
Internal switchYes
Ratio - Input:Output2:1

Product details

Dual-input power mux for handheld designs

The TPS2113PWG4 is a source selector switch from Texas Instruments that routes one of two power inputs (2:1 ratio) to a single output, using an internal N-channel FET. It targets handheld and mobile devices where a battery and a USB or adapter supply share the same load rail. Output current is rated up to 1.25 A, and the quiescent supply current is only 55 µA — low enough to avoid draining the battery when the device is in standby.

Supply range and switching timing

The ON delay is 1 ms and the OFF delay is 5 ms, giving the downstream regulator time to settle before the switchover completes.

Package and lifecycle status

Housed in an 8-TSSOP package (4.40 mm wide body) for surface-mount assembly.

Frequently asked questions

Can TPS2113PWG4 replace TPS2112?

The TPS2113 is a higher-current variant in the same family — the TPS2112 is typically rated lower. Pin compatibility depends on the specific package option; verify the pinout against your layout before substituting. The base product number is TPS2113.

What is the difference between TPS2113PWG4 and TPS2113PWR?

The two parts share the same die and electrical specs. The suffix difference is packaging: PWG4 ships in a tube, while PWR ships in tape-and-reel. Choose based on your assembly line's feeder requirements.