Skip to main content
Texas Instruments TMS320F280200DAT — Microcontrollers & Processors (MCU / MPU / DSP)

Texas Instruments TMS320F280200DAT C2000 C28x Piccolo MCU, 40MHz

MPNTMS320F280200DAT
Active

Texas Instruments C2000 C28x Piccolo 32-bit MCU, TMS320F280200DAT, 40MHz, 16KB (8K x 16) FLASH, 2K x 16 RAM, 7x12b ADC, I²C/SCI/SPI/UART, 20 I/O, 38-TSSOP, -40°C to 105°C.

$5.6100Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

TMS320F280200DAT specifications
ParameterValue
SeriesC2000™ C28x Piccolo™
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.71V ~ 1.995V
Operating temperature-40°C~105°C(TA)
Speed40MHz
PackageTray
RAM size2K x 16
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, SCI, SPI, UART/USART
Number of i (O)20
Core processorC28x
Case38-TSSOP (0.240\", 6.10mm Width)
Data convertersA/D 7x12b
Program memory size16KB (8K x 16)

Product details

It runs at 40 MHz, carries 16 KB of Flash and 2K x 16 of RAM, and integrates a 7-channel 12-bit ADC plus I²C, SCI, SPI, and UART serial interfaces.

At 40 MHz the C28x pipeline executes a single-cycle MAC, which is enough for a current loop with a few state observers. For a single motor axis or a buck converter, the timing margin is comfortable.

Industrial temperature grade and package

The 38-TSSOP package (0.240-inch body width, 6.10 mm) is a fine-pitch surface-mount part — hand-solderable with a fine tip and flux, but easier to place with a stencil and reflow. The 20 I/O pins are enough for a handful of sensor inputs, a few PWM outputs, and a serial debug link.

Frequently asked questions

What is the 40 MHz speed good for on this MCU?

The 40 MHz C28x core handles real-time control loops up to about 20 kHz — single motor axis, digital power conversion, or sensor fusion. It's not meant for multi-axis servos or high-frequency PFC stages.