Skip to main content
Log in
Texas Instruments TLV9062IDDFR — Memory (DRAM / SRAM / Flash / EEPROM)

TLV9062IDDFR CMOS Op-Amp, 10 MHz, Rail-to-Rail, TSOT-23-8

MPNTLV9062IDDFR
End of Life

Texas Instruments TLV9062IDDFR dual CMOS rail-to-rail op-amp, 10 MHz gain bandwidth, 6.5 V/µs slew rate, 538 µA per channel, TSOT-23-8 package.

$0.97Ref. price · indicative, final on quote
Texas Instruments TLV9062IDDFR datasheet (PDF)
PackagingSOT-23-8
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV9062IDDFR specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeCMOS
Voltage - input offset300 µV
Voltage - supply span5.5 V
Current - supply538µA (x2 Channels)
Current - input bias0.5 pA
Current - output (Channel)50 mA
Operating temperature-40°C ~ 125°C (TA)
Gain bandwidth product10 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate6.5V/µs
CaseSOT-23-8
Number of circuits2

Product details

The TLV9062IDDFR: Each channel draws 538 µA typical supply current, which keeps the total dual-channel budget just over 1 mA — low enough for battery-powered sensor interfaces or portable instrumentation where every microamp is accounted for.

Package, footprint, and hand-soldering reality

It comes in a TSOT-23-8 package (the supplier device package is TSOT-23-8, the case code is SOT-23-8). The small footprint leaves room for passives on a tight board. Surface-mount only — no through-hole variant exists. The tape-and-reel or cut-tape options let you order a few for prototyping or reels for production.

Supply rails and temperature range — where it fits

Rail-to-rail input and output means you get the full swing without headroom tricks. That covers engine-bay electronics, outdoor sensor nodes, and factory-floor control cabinets without derating.

Frequently asked questions

Where can I buy TLV9062IDDFR and how do I get a price?

We source TLV9062IDDFR through authorized and independent distribution channels. Submit an RFQ with your target quantity and we will confirm current pricing and availability — no minimum order requirement for standard quantities.

How does TLV9062IDDFR compare to the TLV9362IDDFR?

The TLV9362IDDFR is a faster sibling — 10.6 MHz GBW and 25 V/µs slew rate versus 10 MHz and 6.5 V/µs on the TLV9062IDDFR. The TLV9362 draws 2.6 mA per channel, about 5× the supply current of the TLV9062's 538 µA. Choose the TLV9062 when power budget matters more than raw speed.