Skip to main content
Texas Instruments TLV71318PDQNT — Power Management (PMIC / Gate Driver)

TLV71318PDQNT LDO Regulator, 1.8V Fixed, 150mA, 4-X2SON

MPNTLV71318PDQNT
End of Life

Texas Instruments TLV71318PDQNT LDO regulator, fixed 1.8V output, 150mA, 4-XDFN exposed pad, 4-X2SON (1x1), surface mount, active.

$0.95Ref. price · indicative, final on quote
Packaging4-XDFN Exposed Pad
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

TLV71318PDQNT specifications
ParameterValue
Output typeFixed
MountingSurface Mount
Voltage - input5.5V
Voltage dropout0.7V @ 150mA
Voltage - output (Min (Fixed))1.8V
Output current150mA
Current - quiescent75 µA
Operating temperature-40°C ~ 125°C (TJ)
PSRR70dB ~ 55dB (100Hz ~ 1MHz)
PackageTape & Reel (TR); Cut Tape (CT)
Case4-XDFN Exposed Pad
Control featuresEnable
Protection featuresOver Current, Over Temperature, Reverse Polarity, Short Circuit, Under Voltage Lockout (UVLO)
Number of regulators1
Output configurationPositive

Product details

1.8V fixed rail, 150mA, 4-X2SON package

The TLV71318PDQNT is a fixed-output linear regulator from Texas Instruments, delivering 1.8V at up to 150mA from a 2.5V to 5.5V input rail. The 4-X2SON (1x1 mm) package with exposed pad suits space-constrained designs where a clean analog or digital supply is needed close to the load.

PSRR across the switching band

PSRR is specified at 70 dB at 100 Hz, rolling off to 55 dB at 1 MHz. This means the regulator attenuates upstream switching noise from a 1 MHz DC-DC converter by about 55 dB — enough to keep ripple below 1 mV for most sensor and RF front-end rails, provided the input decoupling is adequate.

Protection and operating range

On-chip protection includes over-current, over-temperature, reverse polarity, short-circuit, and under-voltage lockout (UVLO). The enable pin allows external on/off control without a separate power switch. Output configuration is positive, fixed at 1.8V.

Frequently asked questions

What is the PSRR of TLV71318PDQNT?

PSRR is 70 dB at 100 Hz rolling to 55 dB at 1 MHz, providing good attenuation of upstream switching noise across the typical converter band.

What package does TLV71318PDQNT use?

The device is supplied in a 4-X2SON (1x1 mm) package, which is a 4-XDFN with exposed pad for thermal dissipation.