Texas Instruments TLC084CDR, General Purpose Amplifier, 4 Circuit, 10 MHz Gain Bandwidth, 19 V/µs Slew Rate, 4.5 V to 16 V Supply, 14-SOIC Package, Tape & Reel.
| Parameter | Value |
|---|---|
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 390 µV |
| Voltage - supply span | 4.5 V |
| Current - supply | 1.9mA (x4 Channels) |
| Current - input bias | 3 pA |
| Current - output (Channel) | 57 mA |
| Operating temperature | 0°C ~ 70°C (TA) |
| Gain bandwidth product | 10 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 19V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
It delivers a 10 MHz gain-bandwidth product and a 19 V/µs slew rate, with a supply range from 4.5 V to 16 V — single or split. Each of the four channels sinks or sources 57 mA, and the input bias current sits at 3 pA. The 14-SOIC footprint is a common layout; the Tape & Reel variant (CDR suffix) suits automated assembly lines.
No NRND or last-time-buy notices are on record.
It is a quad general-purpose op-amp with 10 MHz gain-bandwidth, 19 V/µs slew rate, 4.5 V to 16 V supply range, 3 pA input bias, 390 µV input offset, and 57 mA output per channel. It operates from 0°C to 70°C in a 14-SOIC package.
A functional alternative is the TLV9362IDDFR, which offers a higher 25 V/µs slew rate and rail-to-rail output, but it is a dual-channel part in a different package (SOT-23-8). The TLC084CDR is a quad in 14-SOIC, so a direct drop-in replacement is not available — board layout changes would be needed.
The TLC084CDR uses the standard 14-SOIC pinout for a quad op-amp. Refer to the TI datasheet for the exact pin assignments.